Citizen CH-453 Manuel D'utilisation page 14

MEASURING YOUR BLOOD PRESSURE
➋
Plug the air hose
connector into the main
unit.
• Plug the air hose connector
firmly into the air hose
socket on the main unit, as
illustrated.
➌
Place the cuff at the height of the heart.
➍
Press the START/STOP switch (the blue switch).
* If the pressurization value exceeds 280 mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff deflates, and the power turns off.
All digits on the display blink for
➀
approximately one second.
• All digits displayed is an initial
display, indicating that the monitor is
functioning normal.
The
but this does not indicate that the
battery needs to be replaced.
* is displayed for approximately
➁
one second.
The cuff is pressurized automatically.
➂
mark will also be displayed
Eng 14
-
Air hose socket
Air hose connector
-