Eneo ICB-62M2712M5A Guide D'installation Rapide page 11

6. Assemble the Junction box top to the Junction box base using a hinge pin. Hinge
can be inserted at either side for convinience.
7. Connects the Power/Ethernet cables from camera.
8. Set Alarm Input Selection Jumper. ( Refer to 'Cover Opening Alarm and External
Alarm Input' )
9. Cover the Junction box top and tighten with assembly screws (4pcs).
* Caution: If assembly screws are not firmly assembled, it causes water leakage
Hinge pin
Junction Box Top
EN
11