BoomToneDJ LightCube-LZR Mode D'emploi page 15

4- Menu
Display
Addr
SLND
Shnd
SEnS
*
dISP
tESt
uEr
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode. Its DMX input jack will have nothing plugged into it. The other units will
have to select SL1 or SL2 , Their DMX cables plugged into the DMX input jacks (daisy
chain) and the slave led lights will constantly on.
B. By universal DMX controller
Using universal DMX controller to control the units, you have to set DMX address from 1
to 512 channel so that the units can receive DMX signal.
Press the MENU, then find Addr, press ENTER, when the 1 is showing on the display.
Pressing ENTER. Use DOWN and UP button change the DMX512 address.
Value FUNCTIONS
A001-A512 DMX address setting
nASt Master
SL 1 Slave 1 mode
SL 2 Slave 2 mode
Sh 0 Sound mode
Auto
Auto effect speed selection
SP 1-SP 9
0-100 Sound sensitivity selection
dSIP Display reverse
Test mode
u10 Current software version
15