Safety Instructions - BoomToneDJ LightCube-LZR Mode D'emploi

1- Safety Instructions

WARNING
Please read the instructions carefully which include important information
about the installation, operation and maintenance.
Visible and invisible laser radiation. Avoid eye and skin exposure to direct
or scattered radiation ! Class III R laser product EN 60825-1 : 2014
Directive LVD n°2006/95/CE
Directive RoHS 2 n°2011/65/UE
Directive EMC n°2014/30/EU

Please keep this User Manual for future consultation. If you sell the fixture to another
user, be sure that he also receives this instruction booklet.

Unpack and check carefully there is no transportation damage before using the fixture.

It's important to ground the yellow/green conductor to earth in order to avoid electric
shock.

LASER light can cause permanent eye injuries if eyes are exposed to the laser light.

Disconnect main power before servicing and maintenance.

Maximum ambient temperature is: 40℃. Don't operate it when the temperature is
higher than this.

In the event of serious operating problem, stop using the fixture immediately. Never try
to repair the fixture by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance
center. There are no user serviceable parts inside the fixture except the fuse.

Do not connect the device to any dimmer pack.

To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain
or moisture.

Do not look directly at the LASER light beam while the fixture is on.

Do not touch any wire during operation.
English
11