Bosch GKF12V-25 Consignes De Fonctionnement/Sécurité page 11

160992A400_GKF12V-25 10/9/17 2:58 PM Page 11
TEMPERATURE CONTROL / OVERLOAD
PROTECTION INDICATOR
The red LED indicator 3 helps you to protect
the battery against overheating and the drive
against overheating and overload (Fig. 1).
If the LED indicator 3 is lit up permanently
in red, the temperature of the battery or drive
unit is too high. The power tool switches off
automatically. When this happens:
– Turn switch the switch 5 to "O" (OFF)
position.
– Allow the battery and power tool to cool
down before you resume working.
FEEDING THE ROUTER
In addition to the main gripping area 13, the
base has Bosch-exclusive finger support
pockets 20 to provide additional stability for the
router (Fig. 8).
fingers away from router bits and cutters.
Hands contacting with rotating router bit can
cause serious personal injury.
workpiece and always hold the router in a
way that allows you to see your fingers and
thumb.
those shown in figures 9 and 10.
FIG. 8
Always hold the router
with both hands. Keep
Always place both finger
pockets over
Never hold the tool in
other ways, such as
The LED indicator 3 flashes red, the power
tool is jammed and switches off automatically.
When this happens:
– Turn Switch the switch 5 to "O" (OFF)
position.
– Remove the power tool from the workpiece.
– Unlock the spindle locking bar 7 if
necessary.
As soon as the jam has been cleared and the
motor spindle is able to turn freely again, you
can switch the power tool back on.
FIG. 9
the
FIG. 10
13
20
21
-11-