Tuning In A Station; Presetting Stations Manually - Grundig CMS 4200 Manuel De L'utilisateur

BLUETOOTH OPERATION _______________________
Note:
• The operational range between this player and
a Bluetooth device is approximately 8 meters
(without any object between the Bluetooth
device and the unit).
• Before you connect a Bluetooth device to this
unit, ensure you know the device's capabilities.
• Compatibility with all Bluetooth devices is not
guaranteed.
• Any obstacle between this unit and a Bluetooth
device can reduce the operational range.
• If the signal strength is weak, your Bluetooth
receiver may disconnect, but it will re-enter
pairing mode automatically.
1 Press the MODE button on the unit or on the
remote control to select BT (Bluetooth) mode.
"NO BT" will show on the display if the unit is
not paired to any Bluetooth device.
2 Activate your Bluetooth device and select
the search mode. "Grundig CMS 4200" will
appear on your Bluetooth device.
FM OPERATION ______________________________
Auto Scan and Save Preset Station
1 Press the MODE button on the unit or on the
remote control to select FM mode.
2 Press the SCAN button on the remote control
to activate automatic programming.
All available stations are programmed in the
order of waveband reception strength.
• The first programmed radio station is played
automatically.
1 Press the /
previous preset station.
2 Press repeatedly INFO to show different FM
information in FM mode.

Tuning in a Station

Tune in radio stations automatically
buttons to select a next /
• If you cannot find the unit, press and hold the "
" button on the unit or the " " on the remote
control. The system has entered pairing mode.
The unit will show "PAIRING".
3 Select "Grundig CMS 4200" in the pairing
list. On successful pairing, the display panel
shows "BT".
4 Play music from the connected device.
Start, pause or resume play.
Previous track / Next track.
/
To disconnect the Bluetooth function, you
can :
• Switch to another function on the unit.
• Disable the function from your Bluetooth device.
• Press and hold the
button on the remote control. The Bluetooth
device will be disconnected from the unit.
• Press and hold the
remote control, the frequency changes down
or up automatically until a station is found.
• The search may not stop at a station with a
very weak signal.
Tune in radio stations manually
• Press the / buttons repeatedly until you
find the station you want.
• If reception is still poor, try to adjust the
position of the aerial or try to move the radio
to another location.

Presetting Stations Manually

You can preset up to 40 FM stations.
1 Tune in the desired station, then press the
PROG button.
button on the unit or the
/ buttons on the
ENGLISH 43