Disc Operation; Usb Operation; Play Control - Grundig CMS 4200 Manuel De L'utilisateur

DISC/USB OPERATION ________________________

DISC Operation

1 While in ON mode, press the MODE button
on the unit or on the remote control to select
DISC mode.
2 Press the button on the unit or on the
remote control and the disc tray will open
automatically.
3 Place the disc with the label side up into the
disc compartment, and then press the
button on the unit or on the remote control to
close the disc tray.
4 Play starts automatically. If play does not start
automatically, select a title/chapter/track and
then press button.

USB Operation

1 Insert the USB device.
2 Press the MODE button on the unit or on the
remote control to select USB mode.
3 Play starts automatically. If play does not start
automatically, select a title/chapter/track and
then press button.

Play Control

Stop play.
Start, pause or resume play.
Previous track / Next track.
/
/ Perform fast forward/ reverse playback
Select shuffle play modes.
Repeat one:
Repeat all:
Repeat folder:
INFO View extra information of playing content
or mode.
INTRO Every soundtrack will be played for 10
Sec.
Folder Play all tracks in next/last folder
Down/Up
42 ENGLISH
flashing
Programme Setting
The user can programme up to 20 tracks in CD/
USB mode in any desired order. Programme
mode is activated while in STOP mode.
1 Press the button on the remote control.
Press the PROG button to enter MEMORY
mode.
2 Press the number (0-9) buttons or
buttons on the remote control to select the
track that you want to preset, then press
PROG button to confirm.
3 Repeat step 2 to programme more tracks.
4 Press the button to playback programme
tracks.
Note:
• If you want to change the programed files,
press the button two times to clear the
current program files, display shows "PRG
CLR", then repeat the program steps as
above to re-enter the new program files.
• Or opening the CD door or unplug the USB
device to clear the current program files.
/