Installation Of The Appliance; Room Ventilation - Angelo Po 0G0FT1E Manuel D'utilisation Et D'installation

Masquer les pouces Voir aussi pour 0G0FT1E:

Manuel d'utilisation et d'installation (85 pages)

Table des Matières

Les langues disponibles

All installation stages must be considered right from

production of the general layout. Before starting

these stages, as well as deciding the place of instal-

lation, if necessary, the person authorised to carry

out these operations must organise a "safety plan"

to protect the people directly involved, and he must

also ensure strict compliance with all legal require-

ments, especially those relating to mobile work-

sites.

The place of installation must have all the connec-

tions needed to supply the appliance and dispose of

the production residues, must be suitably lit and

must meet all legal health and hygiene require-

ments to prevent the contamination of the foods.

If necessary, fix the exact position of each individual

appliance or subassembly by mark coordinates to

locate them correctly.

Appliances must be at some distance from the

wall (at least 5 cm if the wall is not designed to

be resistant to a temperature of at least

150°C).

The room where the appliance is installed must

have air inlets to ensure that the appliance can op-

erate correctly and provide the necessary air ex-

change in the room itself.

The air inlets must be of appropriate size and must

be protected by gratings and placed so that they

cannot be obstructed.

English