Technical Data; Installation - IKEA BEJUBLAD Mode D'emploi

ENGLISH

Technical data

Model identification: BEJUBLAD 904 1 17 47
Supply Voltage
Rated Power Input
Fuse
MW output power
Grill
Outer dimensions (HxWxD)
Cavity inner dimensions (HxWxD) 200 x 405 x 380
The technical informations are situated in the rating plate inside the appliance.
Data for test heating performance in accordance with IEC 60705.
The International Electrotechnical Commission has developed a standard for comparative
testing of heating performance of different microwave ovens. We recommend the following
for this oven:
Test
12.3.1 Egg custard
12.3.2 Sponge cake
12.3.3 Meatloaf
13.3 Meat defrost
NOTE: this information is only for the qualified technician.

Installation

Mounting the appliance
Follow the supplied separate mounting
instructions when installing the appliance.
Installation and repairs must be carried out
by a qualified technician, in compliance with
the manufacturer's instructions and local
safety regulations. Do not repair or replace
any part of the appliance unless specifically
stated in the user manual.
Children should not perform installation
operations. Keep children away during
installation of the appliance. Keep the
packaging materials (plastic bags,
polystyrene parts, etc.) out of reach of
children, during and after the installation of
the appliance.
Use protective gloves to perform all
unpacking and installation operations.
The appliance must be handled and
220-240V / 50Hz
2300 W
10 A
1000 W
800 W
397 x 595 x 468
Amount Approx. time
750 g 1 1 - 12 min
475 g 9 min
900 g 16 - 18 min
500 g 14 min
Power level
650 W
650 W
800 W
160 W
installed by two or more persons.The
appliance must be disconnected from the
power supply before carrying out any
installation operation.
After unpacking the appliance, make sure
that it has not been damaged during
transport. In the event of problems, contact
the dealer or your nearest After-sales
Service.
After unpacking the appliance, make sure
that the appliance door closes properly.
In the event of problems, contact the dealer
or your nearest After-sales Service. To
prevent any damage, only remove the oven
from its polystyrene foam base at the time
of installation.
During installation, make sure the appliance
does not damage the power cable.
17
Container
Pyrex 3.227
Pyrex 3.827
Pyrex 3.838