Chauvet Professional EPIX TILE 2.0 Guide De Référence Rapide page 5

ÉPIX™ Tile 2.0 QRG EN
Clear Filter
The ÉPIX™ Tile 2.0 comes with a frosted filter installed and an additional
Option
clear filter. The frosted filter can be replaced with the clear filter.
Replacing filters requires a #2 size Phillips screwdriver.
To change the filter, do the following:
1. Stabilize the product on a flat surface.
2. Select one of the two sides of the product that has 8 screws in it.
3. Unscrew all 8 screws.
4. Remove the side of the product.
5. Slide the old filter out.
6. Slide the new filter in.
7. Replace the side of the product.
8. Replace all 8 screws.
Removable
Side of Tile
8 Phillip's
#2 Screws
Filter Slot
The frosted filter should be installed with the shiny side facing toward
the LEDs.
5