HoMedics COMFORT PRO ELITE NMS-450H Manuel D'instructions page 3

INSTRUCTIONS FOR USE
Fig. 1 Fig. 2
1. Insert adapter jack into the plug on left hand side of wrap. (Fig. 1)
2. Plug into a AC 120-volt outlet.
3. Place massager on your neck in the desired position. (Fig. 2)
4. To activate the massage action, press the power button on the control pad, massage will activate
on the low setting in steady vibration program. (Fig. 3) To increase intensity press once for
medium and a second time for high intensity. Decrease intensity by pressing until reaching your
desired comfort level.
5. To change massage program,from steady to pulse, press the power button once. Pressing power a
second time will turn the unit off.
6. To activate the heat function, press the heat button on the control pad. To turn off the heat
function, simply press the heat button again.
Note: Heat can only be used with massage.
Note: There is a 15-minute auto shutoff on the unit for your safety.
Fig. 3
4
MAINTENANCE
TO CLEAN
Unplug the unit and allow it to cool before cleaning. Spot clean only with a soft, slightly damp sponge.
Never allow water or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, or strong chemicals that might or might not be flammable and/
or damaging to the product to clean.
• DO NOT attempt to repair the massager. There are no user-serviceable parts. For service, contact the
Consumer Relations telephone number listed in the warranty section.
TO STORE
Place massager in its box or in a safe, dry, cool place. Avoid contact with sharp edges or pointed objects
which might cut or puncture the fabric surface. To avoid breakage, do not wrap the power cord around the
unit. Do not hang the unit by the power cord.
5