Setting The Washing Program And Switching It On And Off - Fagor LFA086XL Manuel D'utilisation

EN
On/off button
1
Press to power the appliance.
Program indicator lights
2 These show which program is selected and whether there are any troubleshootings
(error messages).
Program selection button
3
Press in sequence to select the required program.
Add salt indicator light
4
Shows the appliance has run out of salt.
Add rinse aid
5
Shows the appliance has run out of rinse aid.
Supplementary program button
6
Press to select one of the fi ve supplementary programs (see table 3-02b).
Supplementary program indicator light
7
Shows that one of the fi ve supplementary programs will be run (see table 3-02b).
Sanitation indicator light
8
Shows that the function is active.
Half-load wash button
9
Press to select the half-load wash option.
Half-load indicator lights
10 One of the lights shines to show that the half-load wash function has been selected in
the upper or lower rack.
Program delay button
11
Press to delay the start of the program up to 9 hours.
12 Information display (start delay, adjusting water softener)
3.2 Setting the washing program and switching
it on and off
The dishwasher is equipped with a control panel (see fi g. 3-02) which is used
to program the appliance and switch it on and off.
12
USER INSTRUCTIONS
END
AUTO
a b
P
Sanitized Sanitized
FIG. 3-02
Table 3-01
Rev 0.0