Troubleshooting - Fagor LFA086XL Manuel D'utilisation

USER INSTRUCTIONS
6

TROUBLESHOOTING

The dishwasher can to signal a number of malfunctions by turning on various
indicator lights, as described below (see following table):
FAULT
E1
AUTO
E2
AUTO
E3
AUTO
E4
E5
Rev 0.0
Acquastop failure
The anti-fl ooding system has tripped (only for models
fi tted with this feature). Activates in case of water leaks.
Contact the technical assistance center.
Safety level
The system limiting the water level in the dishwasher
has tripped. Interrupt the current program. Switch off
the dishwasher, switch it back on again, program a new
cycle and press start. If the problem persists, contact
the technical assistance center.
Water heating malfunction
The water is not heated or is incorrectly heated. Repeat
the washing program; if the problem persists, contact
the technical assistance center.
Water temperature monitoring malfunction
Interrupt the current program. Switch off the dishwasher,
switch it back on again, program a new cycle and press
AUTO
start. If the problem persists, contact the technical
assistance center.
Water intake malfunction
The appliance does not take in water or does so
incorrectly. Make sure the water connections are
correct, that the water supply tap is open and that the
AUTO
fi lter is not clogged. If the problem persists, contact the
technical assistance center.
DESCRIPTION
Table 6-01a
EN
23