Timer Function; Fan Control; Changing The Battery - Brandson Equipment 304970 Mode D'emploi

7.3 Timer function

The fan comes with 4 different timer settings and can be adjusted between 1
hour, 2 hours, 4 hours, and 8 hours. For this purpose, press the "Timer" button on
the remote control or the operating panel of the fan. To increase the duration of
the timer, press the button again.

7.4 Fan control

You can change between the 9 speed levels using the "+" and "-" buttons (6) on
the remote control or the speed control knob (6) on the stand of the fan.
8. Remote control
The fan has a storage compartment for the remote control. This compartment is
located on the side of the stand.

8.1 Changing the battery

The remote control has a battery compartment at the bottom. Open the battery
compartment and remove the CR2025 battery. Ensure that the polarity of the
contacts is correct when replacing the battery.
31
English