Brandson Equipment 304970 Mode D'emploi page 29

6. Before use
Before using the fan, make sure it is placed on a dry and flat surface. Damage can
be caused if the fan is placed on an inclined or sloping surface.
Before moving the appliance, please switch it off and unplug it from the mains.
Hold the stand with both hands and lift the appliance for transport.
Insert the plug directly into a commonly available AC socket and ensure that the
plug is firmly inserted into the socket. Turn off the fan, before disconnecting the
plug.
Never remove the plug by pulling the power cord from the socket! Unplug the
power cord from the socket by holding the plug and disconnecting it from the
socket. Do not disconnect the plug from the socket if the appliance is being used.
Do not use a power adapter that does not match the current / voltage specified
on the type plate of this appliance. Disconnect the plug from the socket and store
the appliance in a safe place when it is not being used.
7. Usage
Keep the fan in an appropriate location and connect the appliance to a properly
installed 220-240V AC socket.
By tipping the protective cage, you can change the angle of inclination according
to your needs by up to 30°.
Press the "Oscillation" button ( ) on the control unit or on the remote
control to turn on the oscillation.
The fan has 9 different speed levels, which you can select using the "Speed levels"
control knob on the fan, or the speed level buttons ( , ) on the remote
control.
29
English