Maintenance Of The Lifting Column; Cleaning; Disposal And Return - Phoenix Mecano Lambda Colonne Notice D'assemblage

7.9 Maintenance of the lifting column

Basically, the lifting column does not require maintenance, but it is not exempt from wear. This
means that in the case of excessive wear, or in the case of non-replacement of worn product
parts, the safety of the product could be compromised.
Work with the lifting column may only take place in accordance with these instructions.
The device may only be opened by authorized specialist personnel. If there is a fault with the
lifting column, we recommend that you contact the manufacturer or send this lifting column for
repair.
•
When working on the electrics or the electrical elements, they must be first disconnected from
the supply to prevent any risk of injury.
•
Unauthorized conversions of or changes to the lifting column are not permitted for safety
reasons.
•
Safety-relevant devices must be inspected for proper function and completeness at regular
intervals.

7.10 Cleaning

You can clean the lifting column and the outer surfaces with a clean, lint-free cloth.
Solvent-based cleaners will corrode the material and can damage it.

7.11 Disposal and return

The lifting column must either be disposed of according to the applicable directives and
guidelines, or returned to the manufacturer.
The lifting column contains electronic components, cables, metals, plastics, etc., and must be
disposed of in compliance with the applicable environmental regulations of the respective
country.
In the European Economic Area disposal is governed by the EU Directive 2002/95/EC or the
relevant national legislation.
7. Life phases
55