Panasonic BT-WMA17G Guide D'installation page 5

■ Do not use staple to secure the cable.
(Otherwise, this may cause fire.)
■ When installing, use a method that is appropriate for the
structure and material of the installation location.
■ When installing, always use the supplied components.
(Otherwise, this may cause damaged LCD monitor to fall and cause
injury.)
■ Make sure installed screws do not touch any wiring inside the
wall.
(Otherwise, this may cause electric shock.)
■ Make sure the LCD monitor is installed in a way that does not
block heat emission.
(If heat emission is blocked, this may cause fire.)
• For installation of the LCD monitor, be sure to leave enough space
as indicated below.
Upper part: 5 cm (2 inches) or more. Side: 10 cm (4 inches) or
more. Lower part: 5 cm (2 inches) or more
■ When removing the LCD monitor, also remove the wall mount
adaptor.
(Being caught by the wall mount adaptor may cause injury.)
■ Make sure the electrical outlet is located so that the LCD
monitor power plug is easily assessable.
(When there is a malfunction, if the power plug of the LCD monitor is
not disconnected, this may cause fire or injury.)
■ Make sure two or more persons are used when installing or
removing the LCD monitor.
(If the LCD monitor falls, this may cause injury.)
■ Before installation, always disconnect the power plug of the
LCD monitor.
5