Panasonic BT-WMA17G Guide D'installation page 10

Installation procedure
3 Prepare the LCD monitor
1 )
Remove the stand
Before installing, remove the connection cable from the LCD
monitor.
Remove the screws from the rear and bottom of the LCD
monitor (3 locations) and then remove the stand.
2 )
Attach wall mount adaptor A (for LCD monitor)
Use the four fixing screws (M4×12 mm) to secure the adaptor
(1.8 to 2.4 N·m).
10
Rear
Screw
A B
C D
Stand
Screw
LCD monitor (rear)
A
C
continued
Bottom
B
D