The Control From Pc To Scale; Serial Interface - Gram RK-3 Manuel D'utilisation

THE CONTROL FROM PC TO SCALE (OPTIONAL)
Step 1
Open the serial port to modify. Input the letters Z, T, C , R
and P in the sending window and press key Send again.
Step 2
The scale can conduct the responding function. Z= Zero,

Serial Interface

If external interface is needed, please select the proper RS 232 board firstly,
and only when this board is adopted, the functions can be enabled.
Note: RTC is unavailable.
RS-232 connector
Connect the indicator and computer.
T=Tare, R and P=Printer, C=Cancel Tare.
27