Talon MINN KOTA 2994153 Manuel Du Propriétaire page 9

USING THE FOOT SWITCH
CONTROLLING THE TALON WITH THE FOOT SWITCH
Auto Up Button/
Pairing Button
Anchor Mode Button
Used to select between Standard Mode, Soft
Bottom Mode and Rough Water Mode.
Auto Up/Auto Down Buttons
& Pairing Buttons
Used to deploy, retract or pause the anchor on the
Talon. Also used to pair the Remote to a Talon.
Talon Selection Button /
Work Light Button
Used to select the Port, Starboard, or both Talons.
Used to toggle the Work Light "on" and "off" and
switch between the different Work Light colors and
intensities.
©2018 Johnson Outdoors Marine Electronics, Inc.
Anchor Mode
Selection LED
Anchor
Mode Button
Talon Selection Indicator LEDs
Talon Selection Button/
Work Light Button
Auto Down
Button/Pairing
Talon Selection Indicator LEDs
When 2 Talons are paired in the system, the right
LED is lit when the Starboard Talon is selected and
the left LED is lit when the Port Talon is selected.
Both the right and left arrows are lit when both
Talons are selected. When only one Talon is paired,
the lights will toggle, but the selection will control
the only paired Talon. When a selection is made, the
LEDs will stay lit for 1 second and then turn off.
Anchor Mode Selection LED
The Center LED flashes red and green and then turns
off for Standard Mode. The center LED will be lit
green for Soft Bottom Mode and lit red for Rough
Water Mode. When in Soft Bottom Mode and Rough
Water Mode, the LED will stay lit for 1 second and
then turn off.
Button
minnkotamotors.com | 9