Talon MINN KOTA 2994153 Manuel Du Propriétaire page 11

Deploy the Talon from the Foot Switch
Use the buttons on the Foot Switch to deploy the Talon anchor.
1
a. To deploy the Talon, double press the Down
button on the Foot Switch.
b. While the anchor is deploying, the action can be
paused on the Foot Switch by pressing either the
Down button or Up
c. The paused deployment can be resumed by double
pressing the Down
d. Once the deploying anchor gets to its full length of
travel or comes in contact with the bottom, it will go
through an anchoring sequence determined by the
current Mode and then stop.
NOTICE:
When two Talons are paired, the anchor
of the selected Talon will deploy. The selection can
be Port, Starboard, or both.
Take care that neither you nor other persons approach the Talon too closely, while operating, neither with body parts nor with
objects. The Talon is powerful and may endanger or injure you or others. While the Talon is operating, watch out for persons
swimming and for floating objects. Persons who lack the ability to run the Talon or whose reactions are impaired by alcohol, drugs,
medication, or other substances are not permitted to use this product.
©2018 Johnson Outdoors Marine Electronics, Inc.
button again.
button again.
WARNING
USING THE FOOT SWITCH
Auto Up Button/
Pairing Button
Talon Foot Switch
NOTICE:
You do not need to hold the button to keep
the Talon deploying. The Talon will automatically continue
to deploy when the button is double pressed until it has
reached its full deployment, received input to stop or
anchors to the bottom.
Auto Down
Button/Pairing
Button
minnkotamotors.com | 11