Talon MINN KOTA 2994153 Manuel Du Propriétaire page 10

USING THE FOOT SWITCH
Selecting a Talon to Operate with the Foot Switch
The Talon Selection button toggles the Talon that the Foot Switch is controlling, when 2 Talons are installed on the boat. The
selection toggles between a Talon mounted on the Port or Starboard side of the boat, or it can control both Talons at the same time.
The Talon Selection Indicator LED's are lit based on the selection made.
1
a. To toggle the Talon selected, press the Talon
Selection
Talon is selected.
b. When the button is pressed, one or both of the
Talon Selection Indicator LEDs will be lit. If the
Foot Switch is oriented so the LEDs are facing away
from you, the arrow on the right will be lit when the
Starboard Talon is selected. If the arrow on the left is
lit, the Port Talon is selected. If both arrows are lit,
both Talons are selected.
NOTICE:
When two Talons are paired to the Foot
Switch, it is possible to control them individually.
Therefore, the Talons may be in different states of
deployment.
10 | minnkotamotors.com
button, repeatedly until the desired
Port Starboard
Talon Foot Switch
NOTICE:
The Talon will always remember the last
selection made unless the Talon loses power.
Talon Selection
Indicator LEDs
Talon
Selection
Button
©2018 Johnson Outdoors Marine Electronics, Inc.