Talon MINN KOTA 2994153 Manuel Du Propriétaire page 12

USING THE FOOT SWITCH
Retracting the Talon from the Foot Switch
Use the buttons on the Foot Switch to retract the Talon anchor.
1
a. To retract the Talon, press the Up
Foot Switch.
b. While the anchor is retracting, the action can be
paused on the Foot Switch by pressing either the Up
button or the Down
c. The paused retraction can be resumed by pressing
the Up button again.
d. Once the retracting anchor on the Talon gets to its
full retraction it will stop. If the Talon is already fully
retracted and the Up
error tone will sound.
NOTICE:
When two Talons are paired, the anchor
of the Talon selected on the Foot Switch will
retract. The selection can be Port, Starboard, or
both.
12 | minnkotamotors.com
button on the
button.
button is pressed again, an
Auto Up Button/
Pairing Button
Talon Foot Switch
NOTICE:
You do not need to press and hold the button
to keep the anchor retracting. The Talon will automatically
continue to retract when the button is pressed until the
Talon is either fully retracted or receives input to stop.
CAUTION
Be sure that the Talon is clear of obstructions and persons
while retracting. The spaces between the 3 stages of the Talons
can create a pinch point. Do not come in contact with the Talon
while it is retracting to avoid the pinch point.
Auto Down
Button/Pairing
Button
©2018 Johnson Outdoors Marine Electronics, Inc.