Talon MINN KOTA 2994153 Manuel Du Propriétaire page 7

3
ITEM(S) NEEDED
#2 x 3
c. Double check the Mounting Location. Take the
Screws (Item #2) and place one each in the
Mounting Holes of the Pedestal. Make sure the
Mounting Holes line up with the Marked Locations
and then use a Drill with #2 Phillips Driving Bit to
secure the Pedestal to the Deck of the Boat. Do not
over-tighten.
4
d. Once the Pedestal is installed, take the Foot Switch
and reattach it to the Pedestal. Make sure the Tabs
on the Foot Switch click into place and the Foot
Switch is fully seated on the Deck of the Boat.
©2018 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE FOOT SWITCH
Screws
Deck of Boat
Foot
Switch
Tab
Deck of Boat
Pedestal
Mounting Holes
Tab
Pedestal
minnkotamotors.com | 7