Axis P3364-LV Guide D'installation page 21

1
Side lid
2
Dome cover
2. Rotate the black shield inside the dome cover so it does not cover the lens.
1
Black shield
3. Make sure the rubber gasket sits securely on the dome cover.
4. Clean the dome with a dry soft cloth to remove dust and finger prints and use a blower
to remove dust from the lens.
5. Attach the dome cover and tighten the screws.
6. When the dome cover is in place, make sure that the camera is properly focused.
The installation is now complete.
AXIS P3364-LV Network Camera
21