Axis P3364-LV Guide D'installation page 16

AXIS P3364-LV Network Camera
1
Metal conduit (not included)
Perform the hardware installation in the following order:
1. Mount the Camera Directly onto Wall or
Mount the Camera Using a Mounting Bracket (not included)
2. Adjust the Position of the Lens
3. Adjust Focus and Zoom
4. Complete the Installation
Replace Clear/Smoked Dome Cover (Optional)
To replace the dome cover:
1. Loosen the four screws under the dome cover that hold the dome in place.
2. Replace the old dome with the new. Make sure the rubber gasket sits securely in place
and tighten the screws.
Mount the Camera Directly onto Wall
1. Drill two holes in the wall using the drill template.
16