Axis P3364-LV Guide D'installation page 17

2. Route and connect all required cables. These include the network cable and may include
external input/output devices and the active speaker/external microphone.
3. Attach the camera unit to the wall using screws and plugs appropriate for the wall
material.
The illustration shows a model without IR illumination.
1
Wall screws
2
Network cable
Mount the Camera Using a Mounting Bracket (not included)
Note
The mounting bracket can also be used for mounting the network camera to a junction box.
1. Drill two holes in the wall using the drill template.
2. Route the network cable and, if required, the I/O and audio cables through the wall and
through the holes in the mounting bracket.
3. Attach the mounting bracket to the wall using two screws and plugs appropriate for
the wall material.
4. Connect the cables to the camera unit.
5. Insert the SD memory card (optional).
6. Attach the camera unit to the mounting bracket using two screws (not included).
The illustration shows a model without IR illumination.
AXIS P3364-LV Network Camera
17