Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8.
When prompted, connect the QL-300 to your PC with a USB cable. Then power on the QL-
300. The installation will continue.
9.
The printer driver will be installed. After installation is complete, click Finish.
Installing the Printer Driver (Network)
1.
Ensure the QL-300 is powered on and connected to the network via a LAN cable.
Note: For detailed information about networking, refer to the QL-300 User Guide.
2.
Start the driver installation software. You can obtain the software from
www.QuickLabel.com/downloads.
3.
When the language selection window is displayed, select a language. Then click OK.
28
QL-300 Quick Start Guide
Publicité
Table des Matières
