Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3.
Use three screws to secure the unwinder to the printer. Tighten the screws in order 1, 2,
then 3, as shown in the following diagram.
4.
Extend the adjuster so it contacts the stand. Be careful not to extend the adjuster too far.
Connecting a Power Cord
1.
Securely insert the power cord provided into the power connector on the machine.
2.
Plug the power plug into the power socket.
QL-300 Quick Start Guide
15
Publicité
Table des Matières
