AstroNova QuickLabel QL-300 Guide De Démarrage Rapide page 24

18. After loading the paper, rotate the Roll Paper Guide Adjustment Knob clockwise and align
the Roll Paper Guide to the width of the paper.
Note: Set the Paper Guide correctly. If the Paper Guide is not set correctly, the width of the
paper cannot be detected correctly.
Note: Be careful that the Roll Paper Guide does not press too strongly on the paper. Doing
so could damage the paper.
Note: Do not allow too much of a gap between the paper and the Roll Paper Guide. Doing
so could allow the paper to twist and the print position to shift.
• In the following example, the gap is too large.
• In the following example, the Roll Paper Guide is aligned to the width of the paper.
24 QL-300 Quick Start Guide