AstroNova QuickLabel QL-300 Guide De Démarrage Rapide page 25

• In the following example, the Paper Guide is too tight.
19. Close the Unwinder Cover.
When closing the Unwinder Cover, there is a risk of pinching your fingers or hands. Press
the top of the Unwinder Cover to close it.
Installing the Printer Driver (USB)
1. Ensure the QL-300 is powered off and not connected to your PC via the USB cable.
Note: Do not connect the USB cable until prompted later in this procedure.
2. Start the driver installation software. You can obtain the software from
www.QuickLabel.com/downloads.
3. When the language selection window is displayed, select a language. Then click OK.
QL-300 Quick Start Guide 25