Pair Streamer Pro With Tv Adapter - oticon TV Adapter 2.0 Mode D'emploi

Pair Streamer Pro with TV Adapter

Before using your Streamer Pro for TV listening, it must be paired with
your TV Adapter.
For pairing:
1. Make sure TV Adapter is powered on, i.e. the power indicator is
steady green.
2. Press and hold the ON/OFF button on Streamer Pro (B) for 5-6 seconds
until the blue light starts blinking (A).
3. Place Streamer Pro on top of, or close to, TV Adapter – the pairing takes
around 20–60 seconds. TV Adapter will automatically begin pairing.
4. The pairing is completed when the power indicator on TV Adapter and
the ON/OFF button on Streamer Pro briefly turns steady blue, followed
by orange status.
Pairing is done only once and will normally not have to be repeated.
26 About Start-up Handling Warnings More info
B
A
27