Connect Using Rca - oticon TV Adapter 2.0 Mode D'emploi

Connect using RCA

1. Use the RCA cable from box no. 2 (A).
2. Connect the RCA cable to the RCA output on your TV (B) or home theater
system. (Typically marked "L – R AUDIO OUT" and found on the TV back
or bottom panel.)
3. Connect the RCA cable to the RCA connectors (C) on the back of
TV Adapter.
4. Refer to page 26 to pair Streamer Pro with TV Adapter.
Note
It may be necessary to configure your TV so that the correct audio output is
available on the RCA output.
For more advanced or complex installations please refer to the support
section on www.oticon.ca/support
20 About Start-up Handling Warnings More info
1 2
Box 2
A
1 2
C
B
B
21