Connecting Using Rca - oticon ConnectLine TV 2.0 Mode D'emploi

Connecting using RCA

1. Use the RCA cable from box no. 2 (A).
2. Connect the RCA cable to the RCA output on your TV (B) or home theatre system.
(Typically marked "L – R AUDIO OUT" and found on the TV back or bottom panel.)
3. Connect the RCA cable to the RCA connectors (C) on the back of the TV adapter.
4. Refer to page 28 for pairing of Streamer with the TV adapter.
Please note: It may be necessary to configure your TV so that the correct audio output is
available on the RCA output.
For more advanced or complex installations please refer to the support section on
www.oticonusa.com/connectline
22