Using Your Humidifier; Daily Maintenance - Vicks EasyFill VUL570 Serie Manuel D'utilisation Et D'entretien

Using Your Humidifier

How to Use
Step 1 Step 2
1.
Power: With the Power Knob in the OFF position ( O ), plug humidifier into a polarized
120V outlet.
CAUTION: TO AVOID ELECTRIC SHOCK DO NOT PLUG HUMIDIFIER INTO OUTLET
WITH WET HANDS.
2.
Output: Turn the Power Knob clockwise to highest setting.
3.
Position humidifier to direct mist output away from walls, furniture and bedding. Mist Outlet
can rotate 180° and is removable for cleaning.
4.
Humidity Level: When a comfortable humidity level is reached, turn Power Knob to a lower
setting. A comfortable humidity level is between 40-60%.
CONDENSATION: If you notice condensation on the walls, windows or around unit,
your humidity level is too high. Turn humidifier off and open door to room.
To monitor your humidity level, use a humidity monitor such as the Vicks Humidity Monitor
(V70) available at retailers or at www.vickshumidifiers.com.
Note: Auto shut off feature will activate when water runs out of the Tank or the Tank is removed
from the unit. The auto shut off will not turn off the Power Knob light; it will just turn off the fan
and nebulizer.
8
Step 4
Step 3
Using Vicks VapoPads
® ®
Step 1
Step 2 Step 3
Your EasyFill Cool Mist Humidifier can be used with Vicks VapoPads
provide up to 8 hours of soothing vapors. One free sample of the methol VapoPad is included with
your humidifier. To use your unit with scent pads:
1.
Open Scent Pad Door.
2.
Open Scent Pad by tearing notch on pad bag. Do not touch pad with hands. If pad is touched
do not rub face or eyes as it may cause irritation.
3.
Insert Vicks Scent Pad with angled end facing towards the product. Up to two scent pads can
be inserted. Close door.
4.
After 8 hours, discard scent pad.
To continue using scent pads, repeat steps 1-4.
VapoPads Recommended Usage:
®
• Not recommended for infants under 10 lbs (4.5 kg).
• For children between 10-22 lbs (4.5-10 kg ) do not use more than 2 pads in a 24 hr period.
Scent Pad Ingredients: VSP-19, VSP19FP, VSP19VPC, VSP-19 CAN: Eucalyptus Oil, Menthol,
Glycol,Cedar Leaf Oil & Others.

Daily Maintenance

Step 1 Step 2
1.
Turn off, unplug and remove Tank Cover. Empty Water Tank.
2.
Empty Reservoir by slowly pouring from the low side of the Housing on the opposite side from
the Mist Outlet and away from Power Knob. Wipe outside of housing to dry any water that
may have escaped between Base and Housing.
3.
Rinse Tank, wipe clean and dry with a soft cloth or paper towel.
4.
Refill Water Tank with cool water according to Filling/Refilling the Water Tank instructions.
Note: Ensure Float Paddle remains installed correctly. For detailed instructions, refer to
Float Paddle Installation section.
CAUTION: Improper placement of the Float Paddle could result in leaking or water
not feeding into the Reservoir.
Step 4
12
1
11
10 2
9 3
8
HOURS 4
7
5
6
® , VSP-19 or VBR-5 series, to
Step 4
Step 3
9