Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
installation
EN
note:
The appliance tabs come bent. You must bend the tab flat by hand when fully recessing the appliance into the
wall. See Figure 4.
FIG. 4
2.6
installing the appliance into a mantel
Remove the glass front, refer to "front glass installation" section for removal instructions.
A.
Install the rubber feet onto the bottom of the appliance for stability, refer to "rubber feet installation"
B.
section for instructions.
Install the top and bottom brackets provided.
C.
Insert the appliance into the mantel and secure it with the brackets or refer to "electric fireplace mantel"
D.
installation manual for proper appliance installation instructions.
Place the crystal embers along the media tray, refer to "crystal ember installation" section.
E.
Reinstall the glass front.
F.
14
W415-1730 / B / 07.28.17
Publicité
Chapitres
Table des Matières
