Safety Instructions - Safescan 2985-SX Guide D'installation Rapide

Introduction
Thank you for purchasing a Safescan 2985-SX banknote counter. For proper use and maintenance we advise you to
read this user manual carefully.
Please note
Should the equipment be altered in any way or used in a manner for which it was not intended at the time of
delivery, the supplier of the equipment accepts no responsibility for injury or damage to personnel or equipment.
If the conditions for use of the equipment are changed, the supplier must be contacted or the declaration of
conformity will be invalidated.

Safety instructions

- Place the machine on a flat and stable surface.
- Do not place the machine in dusty or dirty environments.
- Use the supplied dust cover when the machine is not in use.
- Do not place the machine in direct sunlight or near heat sources or air conditioners.
- Always disconnect the power cord before performing maintenance on the machine.
- Always connect the machine to an earthed socket outlet.
- Use only the supplied power cord.
- Operation temperature 15-35 °C / 59-95 °F.
- Operation humidity 30-80% R.H.
- Do not use the machine outdoors.
- Do not expose the machine to liquids.
- This machine contains rotating parts. Never touch the moving parts when the machine is switched ON.
- Please ensure that no foreign objects (coins, paper clips, staples,) fall into the machine, these may block
the mechanical parts and the sensors of the machine and damage or break them and will void your warranty.
- Keep jewellery, long hair, ties and other protruding parts away while operating the machine.
- Never disassemble the machine.
- To prevent shock hazard, do not touch the power cable with wet hands.
- To prevent fire or short circuit, unplug the unit if you want to move it to another position.
- Hold the plug when disconnecting the unit from the power outlet, never pull the cord.
More info, articles, tutorials and videos at: support.safescan.com
English
3