Myq ® Smart Facility Access; Programming Myq Devices - LiftMaster Logic 5.0 GSD Mode D'emploi

To prevent possible SEVERE INJURY or DEATH:
• Install a LiftMaster Monitored Entrapment Protection (LMEP)
Device.
• NEVER permit children to operate or play with door control
push buttons or remote controls.
®
myQ SMART FACILITY ACCESS
LiftMaster offers a connected experience for all sizes of businesses
and their access needs.
myQ technology uses a 900Mhz signal to communicate securely
from your connected devices to myQ enabled accessories or to a
Wi-Fi network. A LiftMaster Internet Gateway model 828LM or a
®
LiftMaster myQ Home Bridge model 819LMB is required for Wi-Fi
internet connectivity. (see Accessories page 35).
myQ APP
Download the myQ app and follow the on-screen prompts to
connect your commercial products. The myQ app enables secure
monitoring and control of Logic 5.0 operators and other myQ
enabled accessories with a mobile device.
• Receive alerts about the status of a commercial door as email or
push notifications on a mobile device.
• The myQ app is free and does not require an annual activation
fee.
• Connected operators receive current firmware updates
myQ FACILITY MANAGEMENT
myQ Facility Management is a premium cloud-based platform to
manage access for unlimited facilities, users and vehicles from
anywhere. Monitor and control your vehicular access doors, gated
entries and dock positions from a universal platform.
• Facility dashboards provide the right people visibility into all
the facilities access points.
• Assign access to the facility based on a specific user role,
device permissions, and scheduling.
• Notification management allows specific users visibility and
insight into process related issues or when something is out of
place.
• Commercial "Intelligence" reporting provides insight to
schedule maintenance based on equipment usage (instead of
calendar-based maintenance), identify energy savings
opportunities, and monitor overall time related to access open
times.
• Activate door ONLY when it can be seen clearly, is properly
adjusted and there are no obstructions to door travel.
• ALWAYS keep door in sight until completely closed. NEVER
permit anyone to cross the path of closing door.
• A connected dock door operator provides complete visibility
into dock operations including door event status, trailer
presence, dock leveler status, truck restraint status, forklift
sensing, and trailer location. Enhance overall efficiency at each
dock position.
SETUP A myQ ® SMART FACILITY MANAGEMENT ACCOUNT
NOTE: If you have an existing myQ
Mangement account will have the same password.
1. Call LiftMaster Customer Care at 800.323.2276 to activate a
Smart Facility Mangement account.
2. You will receive a welcome email from LiftMaster with
instructions to register and login to your account.
3. Set up the facility and add users and groups to provide access to
the facility (see the help in Smart Facility Management).
4. Follow onscreen prompts to get your Logic 5.0 Commercial
Door Operator and additional devices connected.
Visit myQ.com for more information about LiftMaster's myQ
connected solutions.

PROGRAMMING myQ DEVICES

1. Press and release the RADIO button on the logic board to enter
programming mode. The RADIO LED will light.
2. Place the myQ enabled device into learn mode, see the
instructions for the device.
3. When programming is complete, the RADIO LED will turn off.
NOTE: The operator will exit programming mode in 3 minutes if
programming is not completed, and the RADIO LED will turn off.
TO ERASE ALL myQ ENABLED DEVICES:
1. Press and release the
RADIO button on the
logic board (the
RADIO LED will light).
2. Press and hold the
MAS button for 5
seconds. The RADIO
LED will flash for
approximately 5
seconds and the
RADIO LED will turn
off.
All myQ enabled devices
are now erased.
22
® account, your Smart Facility
Programming