Troubleshooting - Samsung NE58 93 Serie Manuel D'utilisation

Troubleshooting

Troubleshooting
Samsung works hard to ensure that you don't have problems with your new
electric range. If you run into unexpected trouble, look first for a solution in the
tables below. If, after trying the suggested solution, you're still having trouble, call
Samsung at 1-800-SAMSUNG (726-7864).
Installation
Problem Possible cause
The range is not The appliance has been
level. installed improperly.
The floor is sagging or
sloping.
The kitchen cabinets are not
properly aligned and make
the range appear to be not
level.
NE58R9311SS_AA_DG68-01177A-00_EN.indd 43
The appliance
must be accessed
for servicing and
cannot be moved
easily.
Solution
CONTROL DISPLAY
• Place the oven rack
in the center of the
oven. Place a level on
The display goes
the oven rack. Adjust
blank.
the leveling legs at the
base of the range until
the oven rack is level.
The display flashes.
• Insure the floor is level
and strong and stable
COOKTOP
enough to adequately
support the range.
Contact a carpenter to
The surface units
correct the situation.
will not maintain
Insure the cabinets are
a rolling boil or
square and provide
will not cook fast
sufficient room for
enough.
installation.
Problem Possible cause
The kitchen cabinets are not
square and too close to the
appliance.
Carpet is interfering with
movement of the range.
Problem Possible cause
A fuse in your home may
be blown or the circuit
breaker tripped.
There was a power failure.
Problem Possible cause
You may be using
inappropriate cookware.
In some areas, the power
(voltage) may be low.
Solution
Contact a builder or
installer to make the
appliance accessible.
Provide sufficient space so
the range can be lifted over
the carpet.
Solution
Replace the fuse or reset
the circuit breaker.
Reset the clock.
Solution
Use pans which are flat and
match the diameter of the
surface unit selected.
Cover the pan with a lid
until the desired heat is
obtained.
English 43
2019-06-13 12:05:04