How To Set The Appliance For Cooktop Cooking - Samsung NE58 93 Serie Manuel D'utilisation

Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150 °F.
NOTE
When you operate a knob, a beep sounds once.
Cooking areas
• The cooking areas on your range are identified by permanent circles on the
glass cooking surface. For the most efficient cooking, fit the pan size to the
element size.
• Pans should not extend more than
• When a control is turned on, a glow can be seen through the glass cooking
surface. The element will cycle on and off to maintain the preset heat setting,
even at high settings.
• For more information on selecting proper types of cookware, refer to the
section "Using the proper cookware" on page 23.
NE58R9311SS_AA_DG68-01177A-00_EN.indd 21
/ " to 1" beyond the cooking area.
1
2

How to set the appliance for cooktop cooking

CAUTION
• The surface elements may be hot and burns may occur. Do not touch the
surface elements until they have cooled down sufficiently.
• At high or medium-high settings, never leave food unattended. Boilovers
cause smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
Surface unit control knob
2
1
1
Single (Left rear, Right rear)
1. Push the knob in.
Turn in either direction to the setting you want.
2.
• Position A : Single burner
• Position B : Dual burner
NOTE
If you remove a knob for cleaning, make sure you re-attach it in the correct
orientation. Refer to the figure above.
CAUTION
The area between the high and off settings is not appropriate for cooking.
2
A
1
B
Dual (Left front, Right front)
English 21
2019-06-13 12:04:57