Control panel
Keep warm
Bridge
display
displays
Power selection zone
"Slider" (rear zone)
USE OF THE APPLIANCE
Display
Display
Designation
0
Zero
1...9
Booster level
U
No pan detection
A
Heat accelerator
E
Error message
H
Residual heat
P
Power
Super Power
U
Keep warm
II
Stop&Go
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically
when the electronic circuit is cooled enough.
Timer
display
Keep warm key
Description
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Automatic cooking.
Electronic failure.
The heating zone is hot.
The Power is activated.
The Super power is activated.
Maintain automatically of 42, 70 or 94°C.
The hob is in pause.
57
Power display
Power selection zone
"Slider" (front zone)
Locking key
Timer
display
Timer keys
On/Off key
Pause/
Recal
key