Yakima PowderHound Instructions De Montage page 4

SECURE MOUNTING ASSEMBLY.
• Slide carrier to
expose unsecured
bail screw.
• Use hex wrench to
tighten screws.
TIGHTEN CARRIERS TO UNIVERSAL MOUNTS.
LOAD SKIS OR SNOWBOARDS.
• keep the tips toward
the rear of the vehicle.
• Load bindings
between the carriers.*
VERIFY BINDING CLEARANCE.
SKILIFT INSTALLATION: OPEN CARRIERS.
1033546D-4/18
Make sure
carriers are
vertically aligned.
If you have
sufficient
clearance,
PROCEED TO
STEP 23
-OR-
OPEN CARRIER.
In some cases the
universal mount will
sit at an angle.
*In some cases you
may need to close
the mount between
your bindings.
Position them fore/
aft to best avoid
hatch contact.
If you need more binding
clearance, or if factory bars
are arched and cannot align
CONTINUE TO
with carriers,
NEXT STEP fOR SkILIfT
ATTAChMENT.