Operating Instructions; Replacing Cutting Disc - Kobalt SGY-AIR226 Mode D'emploi

OPERATING INSTRUCTIONS

1.This tool has a Forward/Reverse Knob (K)
that allows the cutting disc to spin in
forward or reverse direction. Turn the
knob to select the desired direction
(See Figure 1).
2. Push up on the trigger lock (H) while
pressing down on the trigger (G) to start
the tool (A) (See Figure 2).

REPLACING CUTTING DISC

1. Push down on the spindle lock (F) and
turn it counterclockwise until it starts to
slide up onto the hex portion of the spindle.
Rotate the cutting disk back and forth until
the spindle lock fully engages on the hex
portion of the spindle (See Figure 1).
1
2
1
12
K
A
G
H
F