Operating Instructions - Kobalt SGY-AIR228 Mode D'emploi

OPERATING INSTRUCTIONS

1. To operate the tool in the forward
direction, push the forward button (DF)
(See Figure 1).
2. To operate the tool in the reverse
direction, push the reverse button (DR)
(See Figure 2).
This tool has 4 forward and 1 reverse torque
settings with the maximum torque being in
the reverse direction.
3. To select a torque setting in the forward
direction, make sure forward button (DF)
is pushed in all the way (See Figure 3-1).
The torque indicator goes from low to high
(See Figure 3-2).
The smaller the rectangle, the lower the
torque; the larger the rectangle, the higher
the torque.
To choose the the appropriate torque setting
required for the specific job, turn the torque
setting switch (E) either clockwise or
counterclockwise (See Figure 3-2).
1
2
3-1
12
DF
DR
DF
3-2