Preparation; Assembly Instructions - Kobalt SGY-AIR226 Mode D'emploi

PREPARATION

Before beginning the assembly of the product, make sure all parts are
present. Compare parts with package contents list and hardware contents
list. If any part is missing or damaged, do not attempt to assemble the
product.
Estimated Assembly Time: 1 – 3 minutes
Tools and Materials Required for Assembly (not included):
• Thread Sealant Tape
• Tool Oil
• Male Plug

ASSEMBLY INSTRUCTIONS

1. Remove the air inlet protective cap from
the air inlet (J) (See Figure 1).
2. Tighten male plug (not included), turning
clockwise with a wrench (not included) for
air tight connection.
DO NOT OVERTIGHTEN (See Figure 2).
NOTE Use threaded sealant tape
(not included) on the threading of the
male plug.
1
2
10
J
J