Replacing The Fuse; Technical Specifications - EuroLite SL-1200 Mode D'emploi

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
DMX-control-channels:
DMX-512-connection:
Sound-control:
Flash-rate:
Number of colours:
Colour-wheel 1:
Colour-wheel 2:
Dimensions (LxWxH):
Weight:
Maximum ambient temperature T
Maximum housing temperature T
Fuse:
Accessory:
OMNILUX OMI 1200 100V/1200W SFc-15 400h
OSRAM HMI 1200/GS 100V/1200W
PHILIPS MSI 1200 100V/1200W 1000h
EUROLITE DMX Operator 192 Kanal
EUROLITE DMX scan control 192 channels
FUTURELIGHT EX-6/32 controller
FUTURELIGHT EX-8/32 controller
FUTURELIGHT CP-240 controller
Wizard-512 USB DMX-Software + Interface
Wizard-1024 USB DMX-Software + Interface
EUROLITE TV-12 TV-pin M12 w.head-screw
Please note: Every information is subject to change without prior notice. 01.03.2007 ©
230 V AC, 50 Hz ~
1840 W
4
5-pin XLR
via built-in microphone
1-7 Hz
7 dichroic + white
2 correction filters + white
24 possible colour combinations
1220 x 440 x 410 mm
38.5 kg
: 45° C
a
(steady state): 95° C
B
F 10 A, 250 V
No. 89302005
No. 89302010
No. 89302015
No. 70064520
No. 70064525
No. 51834046
No. 51834047
No. 51834265
No. 51860102
No. 51860110
No. 60000730
27/51 51787350_V_1_4.DOC