Trix ALEX ER20 Serie Mode D'emploi page 5

Important: Changes in the settings market with ( * ) for the
Selectrix mode of operation automatically lead to changes in
the DCC mode of operation and versa!
CV Discription
1 * Adress
3 Acceleration delay
4 Braking delay
5 * Maximum speed
17 Extended address (upper part)
18 Extended address (lower part)
29 bit 0: Travel direction polarity reversal
bit 1: number of speed levels 14 or 28/128
bit 2: DCC Operation with braking Block.
DCC-, Selectrix- and DC power Operation
bit 5: Adress size 7 bit / 14 bit
49 * Pulse width for motor control
50 * Rule variant
51 * bit 0: Motor polarity reversal
bit 1: Headlight polarity reversal
bit 2: Track polarity reversal
*** The values for the desired settings must be added.
DCC Value
1 - 127
0 - 127
0 - 127
1 - 7
CV 29, bit 5 =1
CV 29, bit 5 =1
Value
0 / 1
***
0 / 2
0, 1, 2, 3, 4, 5,
0 / 4
6, 7, 32, 34, 35,
36, 37, 38, 39
0 / 32
0 - 3
0 - 3
0 / 1 ***
0 / 2 0 - 7
0 / 4
Factory SX1 Value
Setting
DCC / SX1
3 / 03 01 - 99
8 / 5 1 - 7
6 / 5
5 / 5 1 - 7
255 / — —
255 / — —
6
—
1 / 2 1 - 4
2 / 3 1 - 4
4 / 4 0 - 7
5