Baumer CombiTemp TFRH Manuel De Mise En Service page 6

CombiTemp™ TFRH/N
Example of mounting with weld-in sleeve ZPW3-321
Example of mounting with weld-in sleeve ZPW3-326
170°
5°
5.3 TFRN mounting
DANGER
Risk of injury from hazardous medium
Wear protective equipment for hazardous media (e.g. acids, alkaline solutions).
f
„
Empty vessel and pipes before mounting.
f
„
6 / 54
Temperature measurement
RTD temperature sensor
1
1
1
2
5°
Operating Instructions
1 ZPW3-321
2 Leakage hole
5°
190°
TFRN without connection
Depending on the sensor tip diameter, different
options for mounting are available:
6 mm: Compression fitting
„ „
8 mm: Compression fitting or ventilation duct
„ „
mounting flange
9 Vessel and pipe are free of media
Screw gland or flange on vessel, pipe or
f
„
ventilation duct.
Mount sensor into gland or flange.
f „
Ensure connection is tightened.
f „
5°
www.baumer.com