Symbols; Symbols In Warning Signs; Transport And Storage; Mounting - Baumer CombiTemp TFRH Manuel De Mise En Service

CombiTemp™ TFRH/N

Symbols

3.

3.1 Symbols in warning signs

Symbol Warning term
DANGER
WARNING
CAUTION
ATTENTION
3.2 Approvals
The requirements of the respective 3-A Sanitary Standards will only be fulfilled in
combination with appropriate mounting accessories. Those are marked with the 3-A logo.
Approved for explosion hazardous areas when installed as specified.

Transport and storage

4.
Check packaging and sensor for damage.
f
„
In the event of damage: Do not use sensor.
f
„

Mounting

5.
5.1 Mounting conditions
4 / 54
Temperature measurement
RTD temperature sensor
Explanation
In situations which cause death or serious injuries.
In situations which can cause death or serious injuries.
In situations which can cause light or medium injuries.
For material damage
Operating Instructions
Store sensor where it will be secure against
f
„
shock.
Storage temperature range: –40 ... +85 °C
Relative humidity: < 98 %
The sensor can be mounted on any point in the
vessel or pipe.
www.baumer.com