Télécharger Imprimer la page

Fein Slugger JMC USA 90 Mode D'emploi page 7

Publicité

Les langues disponibles

Les langues disponibles

OBJ_BUCH-0000000276-001.book Page 7 Monday, July 31, 2017 1:42 PM
Emission values for sound (Two-figure – specifications as per ISO 4871)
Sound emission
A-weighted emission pressure power level measured at the workplace
(re 20 μPa), in decibels
Measuring uncertainty
Measured A-weighted sound power level
Measuring uncertainty
C-weighted peak sound pressure level measured at the workplace
in decibels
Measuring uncertainty
REMARK: The sum of the measured emission value and respective measuring inaccuracy
represents the upper limit of the values that can occur during measuring.
Wear hearing protection!
Measured values determined in accordance with the corresponding product standard.
Extension cable.
If the use of an extension cord
WARNING
is required, its length and con-
ductor cross-section must be adequate for the
application in order to prevent a voltage drop
in the extension cord, power loss and over-
heating of the power tool. Otherwise, the
extension cable and power tool are prone to
electrical danger, and the working efficiency is
decreased.
Intended use of the power tool:
Magnetic core drill unit for drilling with core
drill bits and solid drill bits, reaming, counter-
sinking and tapping on materials with surfaces
suitable for magnets in weather-protected
environments using the application tools and
accessories recommended by Slugger.
K
, in decibels
pA
L
wA
K
, in decibels
wA
K
, in decibels
pCpeak
(re 1 pW), in decibels
L
pCpeak
en
7
L
pA
83.6
3
94.6
3
,
97.2
3

Publicité

loading